Frequently Asked Questions

LED lights are not always dimmable. There are many types of LEDs – some are dimmable with a regular incandescent dimmer, some require a special dimmer, and some are not dimmable at all. Each situation needs to be verified before, assuring this can be done. Please check the manufacturer’s specification sheet before dimming.

Remove the crystal from the fixture and wash in lukewarm water and a mild detergent. Rinse and dry the crystal and place it back on the fixture. We do not recommend cleaning using over the counter cleaning agents, it could damage the crystal or finish of the fixture.

The basic rule of thumb is that the bottom of the light should be between 30” to 34” from the top of the table. If your ceiling height is more than 8ft, add another 3” for every additional foot.

LED lamps are sold and used as a replacement for traditional incandescent or halogen lamps (bulbs). They have to fit into the light fittings that were designed for those traditional light sources. Dedicated LED fittings are designed from the outset to house LED chips. These are fixtures that have the LED’s built into the unit without having to change.

Yes it is! With products from Lutron and Legrand the switch is easy. Endless possibilities all controlled from your phone or iPad. Come by the store for more details!

LED will never burn out completely, they will simply fade and degrade over time.